60V 42" Crossover T Tractor Riding Lawn Mower, (6) 8.0Ah Batteries and (3) Dual Port Turbo Chargers | CRT4261

Welcome to a Life. Powered. by Greenworks. Elevate your mowing with the Greenworks 60V 42" Tractor, delivering exceptional power and efficiency. Cut up to 3 acres on a single charge with the industry’s fastest cutting speed, thanks to high-torque brushless motors. Enjoy quick recharges—just 90 minutes for all six 8.0 Ah batteries—and power compatibility with over 75 Greenworks 60V tools. Backed by a 4-year warranty, this tractor offers superior performance and convenience.

• 60V 42" CrossoverT Riding Lawn Mower
• (6) 8.0Ah 60V Batteries
• (3) Dual Port Turbo Chargers
• Mulch Cover
• Owner's Manual

How should I store and care for my Greenworks battery to ensure the best performance and longest lifespan?

We want you to get the most out of your tools, and that starts with understanding how to care for your battery. Proper storage and handling not only extend battery life but also ensure your tools are ready to perform when you need them most. A Quick Note on Lithium-Ion Battery Performance All Greenworks batteries use lithium-ion technology, which offers powerful, consistent performance without the memory effect found in older battery types. However, lithium-ion batteries are sensitive to temperature extremes—both heat and cold can affect performance and longevity. That’s why proper storage and care are essential for keeping your battery in peak condition. Best Practices for Battery Storage and Use: Store batteries indoors in a cool, dry location—away from direct sunlight, humidity, or extreme temperatures. This protects internal components and preserves performance. Only connect the battery to the charger when actively charging. When not in use, unplug the charger and keep the battery disconnected. If storing for an extended period, charge the battery fully before putting it away. Check the charge every couple of months. If it drops, recharge it before returning it to storage. This helps maintain battery health over time. Allow the battery to reach a safe operating temperature before use. For snow throwers and cold-weather operation, cold batteries may not power on. Let the battery warm to room temperature indoors before inserting it into the tool. Kindly note: Once the battery is at room temperature and installed, the current generated while the tool is running will help keep the battery warm. As long as the battery starts at room temperature, you should not experience issues even when working in cold outdoor conditions. For other tools/hot weather operation, if the battery has become hot from use or charging, allow it to cool before reinstalling. Indoor storage helps avoid performance issues related to both hot and cold environments and keeps your battery protected year-round.

Can I leave my battery in the charger after charging it?

The battery chargers do have auto cut offs to prevent it from over charging. However, we do advise customers to remove the battery from the charger after it has been fully charged and to also unplug the charger from the outlet, as this is good electrical safety practice to do so. This will also help to prevent false defect readings and allows the charger to reset itself each time it’s used to charge a battery.

Why do batteries cost so much more than the tool?

The battery is the most important component for a battery-operated unit. Please be assured we price our batteries with the cost of material, manufacturing, and current market pricing in mind. Batteries are the costliest items to manufacture and ship in any kit. Full kits including a tool, battery, and charger are priced affordably so that consumers can begin building that line of tools and move forward purchasing tool-only units. When you purchase batteries on their own, it is more notable the cost that they carry.

How do I store the battery? Can I leave the battery in the garage or shed?

When the battery is not in use, we suggest storing it indoors, in a cool dry area - away from direct sunlight. Leave the charger unplugged and the battery disconnected from the charger unless it needs charging. It is recommended to store the battery with a full charge, and if it is being stored for a period where no use is expected, to check on the charge every couple of months. If you notice the charge has dropped, we advise charging the battery back up to full before returning it to its safe storage place. Following these steps will ensure you receive the most out of the battery life.

My battery is stuck in my tool. How do I get it out?

60V/ 80V Products: To remove the battery, push and hold the battery release button. Then, pull the battery pack straight out. In some cases, if the springs underneath have gotten locked down you might have to give a small push to the top of the battery to re-engage them to help the battery pop up. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck. 24V/ 40V Products: To remove the battery, press the latch button on the battery pack down and hold. Pull the battery pack out of the handle. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck.

How do I check the charge on my battery?

Press the battery capacity indicator (BCI) button located at the end of the battery. The lights will illuminate according to the battery capacity level. Please note this switch does require a firm direct push using the tip of your finger. If the button is not being fully engaged, the lights will not activate. Please also be advised the lights only stay on for a few seconds and will automatically turn off. Another reason the lights will not power on is if the battery is completely depleted of power and needs to be charged.

Can I use any Greenworks battery in any Greenworks tool?

Our batteries are interchangeable with tools that are of the same voltage platform only. The difference between batteries of the same voltage is the ampere-hour (Ah) rating. The higher the ampere-hour (Ah) rating on the battery is the more run time it has to offer.

Are there certain tools that can’t accept all same voltage batteries?

There are a few exceptions. • Our 80V 20” snow thrower models 2600402 / 2605202 / 2601302 manufactured prior to September of 2017 can only use 2.0Ah or 2.5Ah battery models. • Our 60V 8.0Ah battery model 2957102 cannot be used in the following tools due to the height: dual-port lawnmowers, pressure washers, or the wet/dry vacuum.

Do all batteries of the same voltage use the same charger?

Yes, they do. Each product line has designated charger models that can charge all batteries in that voltage platform, no matter the Ah rating.

The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?

Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging.

My charger is flashing red when I engage my battery. Why is this happening?

When the battery is inserted into the charger and the status LED blinks red, remove the battery from the charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement.

My charger has a solid red light on it when I engage my battery. What is happening?

This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again.

Are your chargers made for 220V or 120V outlets?

Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only.

What is the Tire pressure for CRT426?

Tire pressure should be checked and adjusted when the tires are cold. • Front Caster Wheels: 24 psi • Drive Wheels: 8 psi

Can I use my riding mower on hills?

Tire pressure should be checked and adjusted when the tires are cold. • Front Caster Wheels: 24 psi • Drive Wheels: 8 psi

How well does the riding mower mulch grass?

These mowers are excellent for mulching grass. For the best results, remove the side discharge chute and lower the deck to contain the grass, allowing it to be properly mulched.

Is a Zero-Turn mower easy to drive?

The ease of driving a zero-turn mower depends on the operator's experience. It may take some time to learn, as the mower uses two separate motors and handlebars instead of a traditional steering wheel. We recommend checking out our YouTube videos for helpful tutorials: Greenworks YouTube Channel.

What is the required maintenance for a Zero-Turn mower?

For regular maintenance such as blade cleaning and oil checking, please consult your instruction manual for guidance.

What riding mower deck size do I need?

• For yards up to 2 acres: 21” to 52” cutting width • For yards up to 1-3 acres: 52” to 54” cutting width • For yards up to 3-4 acres: 54” to 60” cutting width • For yards 4 acres and above: 60” or greater cutting width

Is the mower attachment capable of towing items?

These mowers are attachment-capable and can tow items like a yard sweeper or wheelbarrow. The maximum towing capacity is 350 lbs.

Can the mower cut in reverse?

The mower will only cut in reverse when the reverse button is pressed and held. This safety feature ensures safe operation while reversing.

Looking for a compatible part/accessories for this unit?

You can find the related parts and accessories on our parts finder by clicking here.